Aluminum Fence Care

How Do I Clean My Aluminum Fence?

Most basic stains can be cleaned using a simple degreaser, such as Simple Green®, and should be rinsed after applying. For hard water stains, CLR® can be used and should be rinsed after applying.

On occasion you may want to spray your fence with a garden hose. This will remove grass clippings, dirt and fertilizer chemicals and keep it looking as new as possible.  

For light cleaning, rinse with water from bottom to top and back to bottom. This will clean the surface on the way up and prevent the collection of dirty “run down” and possible streaking. Air dry or wipe with a soft, lint free cloth.

For more soiled areas, rinse the surface with clean water from the top to bottom. Use a sponge and clean with mild dish soap and water. Immediately rinse any “run down” to lower parts of the fence. Do not allow dish soap to collect or “puddle” on surfaces. Immediately rinse entire section with clean water. It is very important the dish soap does not dry on the surface. Air or wipe dry with a soft, lint free cloth. For stubborn, water-soluble debris, repeat steps above until clean.  

In coastal areas, it is recommended that you frequently spray your fence with water to reduce accumulations of salt and dirt.

Aluminum Fence Maintenance Checklist:  

To maximize the life of your fence, address these areas:  

• Adjust the gate — As a reminder, gate adjustments and leveling are normal care and maintenance items that the homeowner is responsible for.
• Oil the gate hinges and tighten the screws once a year.
• Do not let the gate swing in the wind. Keep it secured.
• Deter children from swinging on the gate.
• Re-compress and realign loose posts.
• Do not stack or mount any objects or material near your fence

Painting Touch-up

Touch-up paint that matches original paint finish is available for minor scratches and dings. Paint cannot be shipped via air — allow 5-7 days for ground shipment.  

Picket Replacement  

Due to the way our aluminum fence panels are constructed, individual pickets cannot be easily removed. As such, we recommend replacement of the entire panel.